+ Reply to Thread
Results 1 to 5 of 5

Thread: 1985 Yamaha 750 Virago with Hitachi carbs.

  1. #1
    Speed Shifter (750 cc) Black Lightning's Avatar
    Join Date
    Feb 2012
    Location
    150 Mile House BC.
    Posts
    331

    1985 Yamaha 750 Virago with Hitachi carbs.

    I'm not so much trying to sell this machine as I am to find a substitute for the carbs. I can't get it to run right and have narrowed the problem down to the carbs. It seems Yamaha only used these particular carbs for a short time and it is virtually impossible to find parts for them. What I need to find is either a source of parts or a substitute carb that will work on that particular motorcycle. When I get it running properly I will be selling it though. Or, at least putting it up for sale.

  2. #2
    Kick Starter (500 cc) Twinsport's Avatar
    Join Date
    Aug 2011
    Location
    Vancouver Island
    Posts
    133
    If you find a source for some Mikunis please let me know. I know others looking for the same.
    CHEERS
    Brian
    ​Unemployed motorcycle mechanic hoping to make a living from a passion for motorcycles

  3. #3
    Speed Shifter (750 cc) Black Lightning's Avatar
    Join Date
    Feb 2012
    Location
    150 Mile House BC.
    Posts
    331
    Quote Originally Posted by Twinsport View Post
    If you find a source for some Mikunis please let me know. I know others looking for the same.
    I wondered if I could get Mikunies to fit on it. Do you know if it's possible? How long did that particular engine get used?

  4. #4
    Kick Starter (500 cc) Twinsport's Avatar
    Join Date
    Aug 2011
    Location
    Vancouver Island
    Posts
    133
    I know where i can get a set of mikunis for an 1100 virago. Any way apparently K&L has parts for Hitachis.
    CHEERS
    Brian
    ​Unemployed motorcycle mechanic hoping to make a living from a passion for motorcycles

  5. #5
    Speed Shifter (750 cc) Black Lightning's Avatar
    Join Date
    Feb 2012
    Location
    150 Mile House BC.
    Posts
    331
    Quote Originally Posted by Twinsport View Post
    I know where i can get a set of mikunis for an 1100 virago. Any way apparently K&L has parts for Hitachis.
    I'm not all that familiar with K&L? I also found a blog site that suggests the problem may be in the wiring harness where it passes through the triple tree. When I can get the ice dam melted out from in front of the door to the sea can the bike is in I'm going to look into it.
    The older I get, the faster I was.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts